VT300-10 horizontal inline homogenizer

VT300-10 horizontal inline homogenizer

Share:


VT300-10 horizontal inline homogenizer



VT300-10 "DYNA-FLYERS"horizontal Series is the inline mixers machine works according to the rotor-stator principle. It is not placed inside but outside the main vessel (can be multiple vessel)and connected to it by a piping system. The liquid in thetank is circulated in a loop, as it would be with a pump.Because of the special geometry of the rotor, the liquidbuilds up a vacuum inside the dispersing chamber. Thisvacuum is used to induct powder into the liquid stream directlyfrom any container without dust or losses. Inside the dispersing chamber, high shear energy is appliedto the liquid stream and the surface of the liquid isstrongly expanded to accept the powder that isinducted. Inthe same way, the powder is transported via vacuum (IN FRONT)and reaches the dispersing chamber expanded as well,and the distance between the particles is increased.Both streams (liquid and powder) reach the dispersingchamber in separate streams then come together intothe dispersing chamber and are dispersed with a definedshear gradient. This results in an ideal prerequisite for thewetting of the individual particles. This procedure allowsthe fine distribution of the components at the momentof wetting and in many cases an improvement of the properties of the product can be achieved compared toconventional powder addition systems TECHNICAL PARAMETERMOTOR POWER (KW):4SPEED RANGE (RPM):0-3600POWDER INDUCTION RATE (L/H):10LIQUID FLOW RATE (L/H):60,000MAX VISCOSITY (CPS):200,000SEALING TYPE:DOUBLE ACTING TUNGSTEN CARBIDEPOWER SUPPLY:3 X 380 420 V / 50 HZMAX. ADMISSIBLE TEMPERATURE ( DEGREE CELCIUS):180MAX. PROCESS PRESSURE (BAR):10DIMENSIONS (W X D X H):700X250X400WEIGHT (KGS):100MAIN FEATURESIt is featured by its 3A certified design and a powder handling hooper with an ergonomic working height. -The machine is connected directly to an existing vessel and can be operated with a low effort. Due to the strong induction vacuum besides the induction from a hopper, an induction tube can be used to induct and disperse directly from a powder container. -Even strongly sticky and thickening powders may be inducted and dispersed fast and clean -Liquids such as oils may be inducted and emulsified as well out of a barrel -Due to the simple set-up a trouble-free operation is guaranteed -The machine may be CIP-cleaned and with the fast clamping system it is easy to open and may be assembled without any problem and tension-less -3A certified design

 Inquiry - VT300-10 horizontal inline homogenizer